Send Message
Home ProductsMetallographic Grinding And Polishing Machine

Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen

Certification
China Dongguan Quality Control Technology Co., Ltd. certification
China Dongguan Quality Control Technology Co., Ltd. certification
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

Hey, the hardness tester iVick-484ST was installed last week and works well, thanks for the professional support.

—— Sabinian Smith

I am glad to inform you that the installation of the SHB-3000C Brinell hardness tester has been finished successfully. I would like to thank you!

—— Robbin

I'm Online Chat Now

Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen

Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen
Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen

Large Image :  Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen

Product Details:
Place of Origin: Dongguan/China
Brand Name: iqualitrol
Certification: CE
Model Number: XGrind-311
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Plywood Box
Delivery Time: 20 Working Days
Payment Terms: T/T, Western Union
Supply Ability: 50 Sets per Month
Detailed Product Description
Diameter: Disc Diameter φ250mm Speed: 150rpm, 300rpm, 600rpm, And 800rpm
Power Supply: AC220V/50Hz/1Ph Motor: Power Consumption 550W
Control Panel: Touch Screen Disc Qty: Single Disc
High Light:

metallographic polishing machine

,

double disc polishing machine

 

Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen

 

Catalogue Download: iqualitrol Grinding and Polishing Machine XGrind-311

 

Brief Introduction:

Single disc XGrind-311 touch screen grinder polisher is suitable for pre-grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by a transducer, it can get 150rpm, 300rpm, 600rpm, and 800rpm, which favors the machine with wide applications.

 

The machine is equipped with cooling system which can cool down the specimen during primary grinding so as to prevent overheating and damage the metallographic structure .

 

Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.


Technical Parameters:

Model XGrind-311
Grinding/polishing disc diameter φ250mm
Rotate speed: 150rpm, 300rpm, 600rpm, and 800rpm
Input voltage AC220V/50Hz/1Ph
Grinding/Polishing disc quantity 1
Motor Power Consumption 550W
Dimension 740mm x450mm x370mm
Net weight 35kg

 

Purpose of Grinding and Polishing:

Surface layers damaged by cutting must be removed by grinding. Mounted specimens are ground with rotating discs of abrasive paper, for example wet silicon carbide paper. The coarseness of the paper is indicated by a number: the number of grains of silicon carbide per square inch. So, for example, 180 grit paper is coarser than 1200 grit.

 

The grinding procedure involves several stages, using a finer paper (higher number) each time. Each grinding stage removes the scratches from the previous coarser paper.

 

This can be easily achieved by orienting the specimen perpendicular to the previous scratches. Between each grade the specimen is washed thoroughly with soapy water to prevent contamination from coarser grit present on the specimen surface. Typically, the finest grade of paper used is the 1200, and once the only scratches left on the specimen are from this grade.

 

The series of photos below shows the progression of the specimen when ground with progressively finer paper.

Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen 0

 

Polishing discs are covered with soft cloth impregnated with abrasive diamond particles and an oily lubricant or water lubricant.

 

Particles of two different grades are used: a coarser polish - typically with diamond particles 6 microns in diameter which should remove the scratches produced from the finest grinding stage,

 

and a finer polish – typically with diamond particles 1 micron in diameter, to produce a smooth surface.

Before using a finer polishing wheel the specimen should be washed thoroughly with warm soapy water followed by alcohol to prevent contamination of the disc. The drying can be made quicker using a hot air drier.

 

Mechanical polishing will always leave a layer of disturbed material on the surface of the specimen. Electropolishing or chemical polishing can be used to remove this, leaving an undisturbed surface.

 

Disc 250mm Four Steps Speed Metallographic Grinding and Polishing Machine with Touch Screen 1

 

Grinding and polishing is the final stage in the metallographic sample preparation process and consists of several steps. Each step uses finer abrasive than the previous one, the ultimate goal being to produce a deformation-free, scratch-free and highly reflective sample surface. The sample may need to be examined, either etched or unetched, to reveal the microstructure of the material. It frequently happens that contrasts in the material are only visible after a successful etching step.

 

After a metallographic sample has been mounted, grinding and polishing creates a flat and even surface. Any potential residue from the mounting process or damage from the sectioning process are ground off to expose the actual microstructure of the sample. Polishing removes abrasions from the previous steps to provide a smooth surface. LECO grinding and polishing instruments ensure that metallographic instruments provide a reliably clean sample that will be ready for further analysis.

 

Pre-grinder machine is the result of a large-scale research work and the wisdom of the designers as well as the suggestions of the users. As an excellent piece of specimen pre-grinding, the pre-grinder has a lap with a larger diameter compared with the same kind of machines produced in our country and the rotational speed of its lap is quite different form that of the machines turned out in our country in order to meet the requirements of the pre-grinding of various materials.   

 

The working principle of Pre-grinder machine is as follows: clear water provided by a water tube flows into the rotating lap and the abrasive paper flowing over the water throws the water out of the lap as the result of the excentric force of the rotating lap forming a vacuum space before the atmospheric rescuer presses the abrasive paper on the lap tightly. Now it is time to operate the pre-grinding. When the lap stops rotating, the work is done and abrasive paper can be easily taken off.

 

Contact Details
Dongguan Quality Control Technology Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)

Other Products